6 different types of tiles


Ceramic tiles are only thin pieces of clay, usually with a color or pattern on the face, covered with an enamel and cooked to produce a surface that is extremely resistant, waterproof and stain resistant. The surface may be smooth or textured.

The tiles are found in squares, often 4-1 / 4 in. (108 mm) or 6 inches. (152 mm), oblong and a small number of intertwined shapes. Some tiles are sold in metric sizes: for example, 100 mm, 150 mm and 200 mm.

Originally, ceramic tiles had unbleached square edges, and special tiles with one or two rounded edges had to be used to top the edges of the tiles. Now, square tiles are often glazed on all four sides, or some tiles in a box have one or two glazed edges. The "universal" tiles have angled edges so no spacers are needed: the right size of the grout is left.

There are two types of plastic spacers available for use with square tiles that do not have spacers. Both have a cruciform shape and are inclined towards the junction of four Tiler in New York(or two on one edge); a type is removed when the adhesive is set; the other is smaller and left in place. An alternative is to use match connectors located between adjacent tiles.

To finish the edges of the ceramic cladding areas, you can get a plastic edge, some of which fits the edge of the last tile. At interior corners (such as next to a bathroom), matching quadrant tiles can be used, and there is a special casting to seal the space between the tiles and the kitchen counter. Flexible silicon sealants can also be used for both jobs.

Special ceramic tiles are also available, heat-resistant tiles around chimneys and next to boilers and frost-resistant tiles for outdoor toilets without, for example, heating.

Mounting tiles is relatively easy, although it can take a long time. They must be glued to the wall with a special adhesive for ceramic tiles, and the space between the tiles must be filled with a water repellent compound called grout.

A tiled surface is cold, so it in humid spaces can suffer from condensation.

Cork tiles are made by cutting pressed layers of the bark into a cork to produce thin panels. Most are 300 mm square and about 3 mm thick, but elongated panels are also available.

The surface of the cork tiles is warm to the touch, but unless braided (e.g. cork tiles), it is easily marked and not easily cleaned. The tiles can be glued to the wall with corkscrew or contact adhesive, making them relatively easy to install, but almost impossible to remove later.

The metal tiles are made of thin metal sheets and have hollow backs. They can be attached to the wall with double-sided adhesive pads or with an adhesive. Most metal tiles can be cut into shape with scissors, although tin cuts may be necessary for the toughest. Metal tiles can also be folded into shape. The tiles are usually gold, silver or copper and can have a matte or semi-gloss finish. In addition, the metallic effect can be overprinted with an individual pattern or design. The sizes are 108 mm, 150 mm or 300 mm square. The durability of metal tiles varies from one brand to another; Some are affected by steam. Most are damaged by abrasives.

The mirror tiles are small squares of silver glass, usually 152 mm or 230 mm square. Most are made of transparent glass, but there are choices of silver, bronze or smoky gray finish. They are usually used to decorate the back of niches and similar small areas and are attached to the wall with small, double-sided adhesive pads. Unless the surface to which they are attached is perfectly flat and sand, a distorted reflection of the tile surface is produced.

Bricks and stone tiles are man-made simulations of real bricks and stones. Some are actually thin pieces of pressed stone aggregate slices or bricks. Most types of adhesive to the wall with special adhesive. A wide range of colors, shapes and sizes are available.

The mosaics are small pieces of ceramic tile, usually square, although there are also round and intertwined shapes. The pieces are mounted on ...

TAGS: , ,

Photo Gallery

0 Comments Write your comment

    1. Loading...